Cambio Semi-Automático Protmi-3
¿Cómo se instala?
El cambio rápido Protmi-3 se intercala en el cableado de alimentación positiva de las bobinas de alta, si la motocicleta posee bobinas integradas nipondenso se puede suministrar el kit con el cableado especifico para el montaje de kit en la motocicleta.
¿Cómo funciona?
Funcionamiento del cambio rápido Protmi-3:
Gracias al cambio rápido Protmi-3 el piloto de una motocicleta puede subir de marcha sin necesidad de cambiar la posición del puño del acelerador, ni desembragar el motor de la motocicleta.
El sistema de cambio rápido Protmi-3 se compone de una varilla con pulsador y una centralita de gestión.
- Varilla con pulsador: encargada de proporcionar la señal de inicio de cambio a la centralita Protmi-3.
- Centralita Protmi-3: encargada de realizar el corte necesario en el encendido del motor, que permitirá realizar el cambio de la marcha.
En circuito Protmi-3:
El piloto decide el momento del cambio de marcha, para poder realizarlo pulsa la palanca de cambio generando la señal de inicio de cambio; la centralita Protmi-3 realiza el corte del encendido para poder realizar un cambio de marcha óptimo.
¿Sirve para todas las motos?
El cambio rápido Protmi-3 se puede instalar en cualquier motocicleta que disponga de varilla selectora de cambio, y pueda suministrar 12 voltios DC a la centralita de control Protmi-3.
Actualmente está disponible la Protmi-3 para Supermotards, quads, cross y enduro.
¿Es compatible con otras centralitas?
El cambio rápido Protmi-3 es un sistema individual, por lo que no altera el funcionamiento de cualquier otro componente de la motocicleta. La varilla de cambio con pulsador se puede utilizar en las centralitas Rapid-Bike, Power Commander-3.
¿Sirve para reducir marchas?
La misión del cambio rápido protmi-3 es enlazar marchas lo más rápido posible, y así ser más veloz en pista, por lo que no tiene sentido reducir marchas rápidamente cuando se está reduciendo.
¿Perjudica al cambio de la motocicleta?
Desde siempre los pilotos han cambiado de marcha en motocicletas tan solo bajado el nivel del gas, y los cambio de las motocicletas no sufrían un desgaste muy prematuro, ahora el cambio rápido hace lo mismo pero sin tener que quitar el nivel del gas para no perder potencia en los cambios de marchas.
¿Tiene garantía?
El cambio rápido Protmi-3 tiene 2 años de garantía.
Semi–Automatic Change Protmi-2
How do I install?
The rapid change Protmi-2 is inserted in the positive power wiring ignition coils, if the motorcycle has nipondenso integrated coils can be supplied with wiring specific kit for mounting on motorcycle kit.
How does it work?
Rapid change operation Protmi-2:
Thanks to rapid change Protmi-2 pilot a motorcycle can start up without changing the position of the throttle, or disengage the engine from the motorcycle.
The quick change system Protmi-2 consists of a rod with a PBX switch and management.
Push rod: responsible for providing the start signal to the ECU exchange Protmi-2.
Switchboard Protmi-2: charge of making the cutout in engine power, to perform the change of gait.
Protmi circuit-2:
The pilot decides when changing gear, in order to realize the shift lever press start signal generating exchange, the exchange Protmi-2 performs on the court to perform optimal gear change.
Is it for all bikes?
The rapid change Protmi-2 can be installed in any motorcycle that has change selector rod, and can supply 12 volt DC to the control unit Protmi-2.
Currently available for the Protmi-3 Supermotards, quads, motocross and enduro.
Is it compatible with other exchanges?
The rapid change Protmi-2 is a single system, so that does not alter the operation of any other part of the motorcycle. The shift rod with push button can be used in the Rapid-Bike, Power Commander-3.
Will it help to reduce speed?
The mission of rapid change protmi-2 is link speed as quickly as possible, and thus be faster on the track, so there is no point shifting down quickly when it is shrinking.
It harms the change of the motorcycle?
Since the drivers always shifted gears on motorcycles just turned down the gas, and the change of the motorcycles did not suffer too premature wear, rapid change now does the same but without having to remove the gas level to keep power gear changes.
Is there a warranty?
The rapid change Protmi-2 has 2 years warranty.
Semi-Automatic Rate Protmi-2
Wie installiere ich?
Der rasche Wandel Protmi-2 ist in der positiven Stromleitung Zündspulen eingesetzt, wenn das Motorrad nipondenso integrierten Spulen mit Verkabelung spezifischen Kit für die Montage auf dem Motorrad-Kit geliefert werden.
Wie funktioniert es?
Schneller Wechsel Betrieb Protmi-2:
Dank dem raschen Wandel Protmi-2 Pilot ein Motorrad starten können, ohne die Position der Drosselklappe, oder lösen Sie den Motor aus dem Motorrad.
Das Schnellwechselsystem Protmi-2 besteht aus einem Stab mit einem PBX-Schalter und-management.
Schubstange: verantwortlich für die Bereitstellung der Start-Signal an die ECU Austausch Protmi-2.
Telefonzentrale Protmi-2: Ladung zur Herstellung der Aussparung in der Motorleistung, um die Änderung der Gangart durchzuführen.
Protmi kreis-2:
Der Pilot entscheidet beim Gangwechsel, um den Schalthebel drücken Startsignal Erzeugung Austausch zu realisieren, führt der Austausch Protmi-2 auf dem Platz, um eine optimale Gangwechsel durchführen.
Ist es für alle Fahrräder?
Der rasche Wandel Protmi-2 kann in jedem Motorrad, die Änderung Schaltstange installiert werden, und können 12 Volt DC an die Steuereinheit Protmi-2 liefern.
Momentan verfügbar für den Protmi-3 Supermotards, Quads, Motocross-und Enduro.
Ist es mit anderen Börsen?
Der rasche Wandel Protmi-2 ist ein einziges System, so dass ändert nichts an der Bedienung von jedem anderen Teil des Motorrads. Die Schaltstange mit Drucktaster können in der Rapid-Bike, Power Commander-3 verwendet werden.
Wird es helfen, um die Geschwindigkeit zu reduzieren?
Die Mission des raschen Wandels protmi-2 ist Verbindungsgeschwindigkeit so schnell wie möglich, und damit schneller auf der Strecke, so gibt es keinen Punkt Herunterschalten schnell, wenn es schrumpft.
Es schadet dem Wechsel des Motorrads?
Da die Treiber immer schaltete auf Motorrädern nur lehnte das Gas, und die Änderung der Motorräder nicht leiden zu vorzeitigem Verschleiß, schnelle Änderung jetzt macht das Gleiche, aber ohne das Gas Stufe entfernen zu halten Macht Gangwechsel.
Gibt es eine Garantie?
Der rasche Wandel Protmi-2 verfügt über 2 Jahre Garantie.
Changer Protmi-2 semi-automatique
Comment puis-je installer?
Le changement rapide Protmi-2 est inséré dans le câblage des bobines d’allumage à énergie positive, si la moto a bobines intégrées nipondenso peut être fourni avec le kit de câblage spécifique pour le montage sur kit moto.
Comment ça marche?
Opération de changement rapide Protmi-2:
Merci à changement rapide Protmi-2 pilote une moto peuvent démarrer sans changer la position de l’accélérateur, ou désaccoupler le moteur de la moto.
Le système de changement rapide Protmi-2 se compose d’une tige avec un commutateur et de gestion PBX.
La tige de poussée: la responsabilité de fournir le signal de départ à l’échange d’écus Protmi-2.
Standard Protmi-2: charge de faire la découpe dans la puissance du moteur, pour effectuer le changement d’allure.
Protmi circuit-2:
Le pilote décide quand changer de vitesse, afin de réaliser le signal de démarrage, appuyez sur le levier de changement de vitesses générant échange, l’échange Protmi-2 effectue sur le terrain pour effectuer le changement de vitesse optimal.
Est-ce pour toutes les motos?
Le changement rapide Protmi-2 peut être installé dans n’importe quelle moto qui a changé tige de sélection, et peut fournir 12 volts CC à l’unité de commande Protmi-2.
Actuellement disponible pour les Protmi-3 supermotards, quads, moto-cross et enduro.
Est-il compatible avec d’autres bourses?
Le changement rapide Protmi-2 est un système unique, de sorte que n’altère pas le fonctionnement de n’importe quelle autre partie de la moto. La tige de commande avec bouton poussoir peut être utilisé dans le Rapid-Bike, Power Commander-3.
Cela aidera à réduire la vitesse?
La mission de l’évolution rapide protmi-2 est la vitesse du lien le plus rapidement possible, et donc être plus rapide sur la piste, donc il n’y a pas de point de rétrograder rapidement quand il se contracte.
Elle nuit à la modification de la moto?
Depuis les pilotes toujours changé de tactique en moto juste refusé le gaz et le changement des motos n’ont pas subi l’usure prématurée, l’évolution rapide fait désormais la même chose, mais sans avoir à retirer le niveau de gaz à garder des changements de rapports de puissance.
Y at-il une garantie?
Le changement rapide Protmi-2 a 2 ans de garantie.